20KP Series 20KW Transient Voltage Suppressor

ENQUIRY

Enquiry Form

Quo quod etiam postulant cu, mei solet elaboraret id, cu legimus vivendum adipiscing ius. Ei malorum legimus accumsan sit.

20KP Series 20KW Transient Voltage Suppressor

V RRM = Repetitive peak reverse voltage
V DRM = Repetitive peak off state voltage
V RSM = Non repetitive peak reverse voltage (2)

DESCRIPTION:

The 20KP series of high current uni/bi-directional transient suppressors are designed for A.C. line protection and high power DC bus clamping applications. These devices offer uni/bi-directional port protection from 20 volts to 300 volts. They provide a clamping voltage lower than the avalanche voltage. Therefore, any voltage rise due to increased current conduction is contained to a minimum, providing the best possible protection level. They can also be connected in series and/or parallel to create very high capacity protection solutions

FEATURES:

  • Low zener
  • Excellent clamping
  • JEDEC R-6/P-600 Molded
  • Repetition rate (duty cycle): 01%.
  • Color band denoted cathode except bidirectional.
  • High temperature soldering: 260℃/10s at
  • Glass passivated chip junction in R-6/P600
  • 20000W Peak Pulse power capability at 10×1000μs

Fast response time: typically less than 1.0ps from 0V to VBR min

ABSOLUTE MAXIMUM RATINGS (TA=25ºC, RH=45%-75%, unless otherwise noted)

 

Parameter Symbol Value Unit
Peak pulse power dissipation on 10/1000μs waveform PPP 20000 W
Peak pulse current of on 10/1000μs waveform IPP See next table A
Steady state power dissipation at TL=75℃ PM(AV) 8 W
Operating junction and Storage temperature range TSTG, TJ -55 to +125
Peak forward surge current, 8.3ms single half sine-wave IFSM 400 A
Translate »